1x nintendo nes top loader with a hidef nes kit (firmware 2.25 installed by me and created by kevtris -(slight yellowing to top shell) -red LED light added to power switch and will light up when console is witched on 2x nitendo nes controllers 1x OEM nitendo nes ac adapter 1x hdmi cable 6 feet long
HiDefnes Kit information as follows;
No frame buffer so NO LAG between controller and monitor.
Resolutions: Using ntsc cpu/ppu: 480p, 720p, 1080p Using pal cpu/ppu: 567p, 720p, 1080p Kit will auto detect which chips it’s connected to. EDID will allow only as high a res as the monitor will handle, but there is the option to turn it off and force higher res.
Aspect ratio will be user adjustable in the menu, seen as horizontal stretch in the menu.
Multiple palettes and a black & white mode will be user select-able in the menu.
Over clocking with hot keys with option to have it not mess up the sound pitch by following ppu clock instead of cpu.
Dafault hot key for menu is select + left
User can reconfigure all hot keys.
Hot keys can be set to be read on either controller 1 or 2.
Long and short console reset via controller hot keys.
Updating firmware will be done via an “.nes” file, via flashcart etc, if necessary. No need to send the console or board back to me or the installer for updates!
All audio is generated in the kit, so it will be %100 digital and theoretically noise free. User will be able to control each audio source volume independently. User will be able to pan between left and right output of each source independently. All expansion audio chips are programmed in to the kit, simply turn the one you need on or off. The cart or rom you’re playing does not need the actual hardware for this to work! VID LINK
7 scaling options are included: Main scaling menu has: HQ2X, HQ3X, HQ4X, scale 2X, and scale 3X. Plus a bonus x-ray mode. In 1080p60 height sub menu there is also 4x and 4.5x. (added later and couldn’t be placed in same ares)
Several scanlines options: none, nes, 2x, 3x, 4x, and 5x. 4x scaling mode helps with even scanlines.
Tested and working with some known problem carts, multi carts, powerpak, and everdrive.
What youre buying is ;
1x nintendo nes top loader with a hidef nes kit (firmware 2.25 installed by me and created by kevtris -(slight yellowing to top shell) -red LED light added to power switch and will light up when console is witched on 2x nitendo nes controllers 1x OEM nitendo nes ac adapter 1x hdmi cable 6 feet long
HiDefnes Kit information as follows;
No frame buffer so NO LAG between controller and monitor.
Resolutions: Using ntsc cpu/ppu: 480p, 720p, 1080p Using pal cpu/ppu: 567p, 720p, 1080p Kit will auto detect which chips it’s connected to. EDID will allow only as high a res as the monitor will handle, but there is the option to turn it off and force higher res.
Aspect ratio will be user adjustable in the menu, seen as horizontal stretch in the menu.
Multiple palettes and a black & white mode will be user select-able in the menu.
Over clocking with hot keys with option to have it not mess up the sound pitch by following ppu clock instead of cpu.
Dafault hot key for menu is select + left
User can reconfigure all hot keys.
Hot keys can be set to be read on either controller 1 or 2.
Long and short console reset via controller hot keys.
Updating firmware will be done via an “.nes” file, via flashcart etc, if necessary. No need to send the console or board back to me or the installer for updates!
All audio is generated in the kit, so it will be %100 digital and theoretically noise free. User will be able to control each audio source volume independently. User will be able to pan between left and right output of each source independently. All expansion audio chips are programmed in to the kit, simply turn the one you need on or off. The cart or rom you’re playing does not need the actual hardware for this to work! VID LINK
7 scaling options are included: Main scaling menu has: HQ2X, HQ3X, HQ4X, scale 2X, and scale 3X. Plus a bonus x-ray mode. In 1080p60 height sub menu there is also 4x and 4.5x. (added later and couldn’t be placed in same ares)
Several scanlines options: none, nes, 2x, 3x, 4x, and 5x. 4x scaling mode helps with even scanlines.
Tested and working with some known problem carts, multi carts, powerpak, and everdrive.
